Make a LEGO Model Rise and Fall: What to Change in a Cam Mechanism

Published

If a LEGO figure spins when you wanted it to bow, turning the handle more slowly won't create the missing movement. You need a mechanism that converts the rotation into a rise and fall. A cam can do that, with its outline controlling the movement of the piece resting against it.

That moving piece is the follower. As the cam rotates, the surface beneath the follower changes position and the follower moves with it. Look at their contact point before changing the motor or adding another gear.

Choose the movement before its speed

Describe the action you want: one lift per turn, two short lifts, or a gradual rise followed by a quick drop. These are different movement patterns. The speed of the crank tells you how quickly the pattern repeats; the cam's shape and mounting determine what happens during that repetition.

LEGO Education's Hammer lesson makes this distinction concrete. One modification produces two hammer strikes for each turn of the handle. Changing the axle's position through the cam also changes the action, including a slow rise with a fast drop or the reverse.

A gear reduction would make an existing action repeat more slowly. It wouldn't, by itself, turn a one-strike cam into the two-strike version. Work out whether you want to change the pattern or just its pace.

Follow the outline relative to the axle

A cam's profile is the outline that passes beneath the follower. LEGO Education illustrates circular, pear-shaped and irregular cams. Their different profiles can control how far and when the follower moves.

The axle position matters alongside that outline. A centered circular surface presents the same radius as it turns. Moving the axle off-center changes the distance from the axle to the contact surface during a rotation. That is why identifying a part as round doesn't, by itself, tell you whether its mounting will create a lift.

In the Hammer lesson's dancer extension, LEGO identifies a round wheel arrangement that spins the dancer without lifting her. Another arrangement makes her rise, fall and turn. Those are useful examples to compare when your character has one of the motions you wanted but is missing another.

Check whether the follower can follow

Turn the handle slowly through a complete cycle while watching the contact. Does the follower remain able to move, or does a surrounding piece obstruct it? If a decoration reaches the bodywork before the cam reaches its highest point, speeding up the mechanism won't provide the clearance it needs.

Check the axle supports too. The Hammer lesson warns that bushings rubbing against bricks can make the crank stiff. Extra resistance can obscure the movement you're trying to understand.

Cams also involve sliding contact. LEGO Education notes friction between the cam and follower and describes roller followers as one way mechanisms reduce it. This isn't a reason to add a roller to every build. First identify whether the problem is the intended profile, insufficient clearance or resistance at a connection.

Finish one full cycle before enclosing it

Keep the moving detail attached while checking its full travel. A bare mechanism clearing the frame doesn't establish that a wing, head or decoration will clear it too. Count the lifts in one crank turn and watch how the follower returns before adding a screen around the mechanism.

Use the illustrated Hammer and dancer arrangements alongside LEGO Education's cam principles. Choose an arrangement for the action you want, then adjust how quickly you drive it.